How to Style Outdoor Cushions: Mixing Prints, Stripes and Plains
Share
Good outdoor cushions styling is less about buying more cushions and more about choosing the right three fabrics. The settings that look relaxed and finished in magazines nearly always follow the same pattern: one statement print, one supporting pattern such as a stripe, and one plain to hold it all together. This guide shows you how to apply that formula outdoors, which sizes to use, and how it plays out with real fabrics from the 3 Beaches range, which is woven by Sunbrella for full sun and the odd downpour.
Start with the base cushions
Before you think about scatters, look at what you sit on. Seat and back cushions are the largest areas of fabric in an outdoor setting, so they set the mood. Most people do best with a plain or a very small-scale texture here, for three reasons:
- Plains are easy to live with for years and easy to restyle around.
- Small textures hide marks and wear better than flat colours.
- A calm base lets the scatter cushions do the decorating.
Hard-wearing plains such as Lopi (rated to 90,000 double rubs) and Pashmina (100,000) are built for seating that is used every day. For a natural, linen look, the Cocoon collection has Blend, Duckcloth and Stone Linen in Sand, Gravel and Earth. If you need new seat or bench cushions made to size, our custom outdoor cushions service makes them to measure.
The three-fabric rule for scatter cushions
1. A statement print
Pick the fabric you love most and let it set the colour palette. Large designs work best here because a big repeat shows its full character on a 55 or 60 cm cushion. Cooktown Orchids, Desert Rose and Tropical Palm are good examples.
2. A supporting pattern
Next, add a smaller or more regular pattern that picks up one colour from the statement print. Stripes are the classic choice, and geometrics such as a lattice or trellis work just as well. In the 3 Beaches range, Beach Stripe, Bar Stripe, Duck Stripe and Belladonna all fill this role, as do the small-scale Diamond, Cape Cod and Lure.
3. A plain or textured solid
Finally, add a plain in the darkest or lightest colour from your print. It gives the eye somewhere to rest and makes the other two look intentional. Camp, Pure, Linen and Marcella are all useful here.
The rule scales easily. On a two-seater, use one of each. On a large outdoor lounge, repeat the set in pairs and finish with a lumbar cushion in the middle.
Real combinations that work
Coastal navy and white
Navy and white never dates near the water. Combine the cockatoos of Beach Bird in Broadwater with Beach Stripe in Broadwater and the plain Pure in Broadwater. Add Fishnet in Denim if you want a fourth cushion that still reads as part of the set. Every one of these is in the Coast collection, so the blues match exactly.
Resort greens
For a pool or tropical garden, use Daintree Palm in Emerald as the statement, Diamond or Scallop in Emerald as the pattern, and Camp in Emerald as the plain. The Jewel collection is designed so each colour runs across every design.
Soft garden pastels
The Auchenflower collection uses the same five colours throughout. Try Desert Rose in Bell Blue with the fine Belladonna stripe and Linen, all in Bell Blue, or swap to Olive Grove for a softer green.
Earthy safari
For a modern, neutral setting, start with plain base cushions in Barley or Cloud, then add Panthera or Leopard as the statement and a woven texture such as Kindle or Agra as the pattern. These are all from the Sabi Sands collection.
How many cushions, and what size?
As a guide:
- Single armchair: one 50 x 50 cm cushion, or one lumbar.
- Two-seater or daybed: two 55 x 55 cm squares and one lumbar.
- Three-seater or large lounge: two 60 x 60 cm squares, two 50 x 50 cm squares and one lumbar.
- Sun loungers: one lumbar each, 35 x 55 cm or 40 x 60 cm, for head and neck support.
Layer larger cushions at the back and smaller ones in front, and keep odd numbers for a relaxed look or even numbers for a symmetrical, formal one. Our made-to-order cushions in 3 Beaches fabric come in all five of these sizes, and we make each one for you (allow 3 to 4 weeks).
Choosing the right insert
The fabric gets the attention, but the insert decides how a cushion looks after a month of use. For outdoors, choose a polyester fibre or microfibre insert in a water-resistant canvas casing: they shed water, dry quickly and won't go mouldy. Microfibre is softer and plumper, closer to the feel of feather. For covered verandahs and indoor rooms, a feather and fibre blend or 100% duck feather insert gives that relaxed, sink-in look. Our cushion insert guide covers every option in detail. Whatever you choose, an insert one size larger than the cover keeps the cushion full and the corners crisp.
Looking after outdoor cushions
- Bring cushions in or store them in a dry box during long wet spells. The fabric copes with rain, but inserts last longer if they are not left sitting wet.
- Brush off leaves and dirt before they get ground in.
- Spot clean with mild soap and water. Sunbrella-made fabrics such as 3 Beaches can be cleaned with diluted bleach for mould without losing colour.
- Rotate and turn cushions so they fade and wear evenly, and fluff feather inserts regularly.
Common questions about outdoor cushions
Can I leave outdoor cushions out in the rain?
Occasional rain is fine for solution-dyed fabrics and outdoor inserts, but no cushion enjoys being left wet for days. See is outdoor fabric waterproof? for the details.
Should outdoor cushions match my indoor colours?
Linking one colour from inside to outside makes a small space feel bigger, especially where doors open straight onto a deck. It does not need to be an exact match.
Can I mix fabric brands?
Yes, as long as the fabrics are all suitable for outdoor use. Sticking to one collection simply makes colour matching easier.
How do I stop outdoor cushions fading?
Choose solution-dyed acrylic such as Sunbrella or 3 Beaches. Our guide to the best outdoor fabric for Australian sun explains why it lasts longer than printed polyester.