Upholstery fabric samples clipped together for comparison

Martindale Rub Count Explained: What the Numbers Mean for Upholstery

The Martindale rub count is the number most people use to judge how tough an upholstery fabric is. It is useful, and we list it on every fabric we sell, but it is also widely misunderstood. A fabric with twice the rubs does not last twice as long in your living room, and a high number cannot make up for the wrong fibre or weave. Here is what the test actually measures and how to use it sensibly.

How the Martindale test works

A circle of fabric is clamped in a machine and rubbed against a standard abrasive cloth, usually worsted wool, in a figure-eight pattern under a set weight. The machine counts each cycle. The test stops when two threads break or the fabric shows obvious wear. That number of cycles is the Martindale rub count.

It is a controlled way to compare fabrics. It does not simulate claws, spills, sunlight, sharp jeans rivets or the flex of a cushion being sat on hundreds of times.

How many rubs do you need?

These are the ranges commonly used in Australia for furnishing fabrics:

  • Under 10,000: decorative only. Cushions, throws and curtains.
  • 10,000 to 15,000: light domestic. Occasional chairs and bedheads.
  • 15,000 to 25,000: general domestic. Everyday furniture with moderate use.
  • 25,000 to 30,000: heavy domestic. Family sofas and dining chairs.
  • 30,000 and above: commercial. Offices, hotels and busy family rooms.

Our Wear rating filter uses these bands, so you can tick Domestic or Commercial on any collection. For sofas, the sofa and armchair fabrics collection only includes fabrics rated heavy domestic or higher, and the commercial upholstery fabrics collection only includes commercial grade.

Why more rubs is not always better

Above about 50,000 rubs, almost any upholstery fabric will outlast the foam, the webbing and often the frame in a domestic setting. The extra numbers start to matter only in heavy commercial use, such as cafe banquettes or hotel lobbies.

Take two velvets we stock. Warwick Lovely is rated 60,000 rubs and Warwick Mystere 150,000. On a family sofa, both will last for many years. Lovely is heavier and more forgiving of marks, so it is often the better domestic choice despite the lower number. Our velvet guide compares them.

Some fabrics are also listed with a range, such as 15,000 to 20,000 rubs. That usually means a natural fibre like linen or cotton, where testing varies slightly with the yarn. Warwick Haven, a 100% European linen, is an example.

What the rub count does not tell you

  • Pilling: tested separately. A high rub count fabric can still pill.
  • Snagging: loops and loose weaves can snag regardless of rubs. See our bouclé guide.
  • Fading: light fastness is a different test. It matters most near windows and outdoors.
  • Cleaning: how a fabric copes with spills depends on fibre and finish, not rubs.
  • Seam strength: loose weaves can pull at seams under tension.

Wyzenbeek double rubs

Some of our fabrics, particularly from Mokum and James Dunlop, also list a Wyzenbeek result in double rubs. Wyzenbeek is the American test. It rubs the fabric back and forth in a straight line with a cotton duck cloth. The two tests use different methods, so there is no reliable conversion between them. Compare Martindale with Martindale and Wyzenbeek with Wyzenbeek. As a rough reference, 15,000 Wyzenbeek double rubs is often treated as heavy duty in the United States.

Rub counts by piece

Here is how we apply the numbers in practice when helping customers choose:

  • Family sofa or lounge: 25,000 minimum, ideally 40,000 or more if kids and pets use it daily.
  • Dining chairs and kitchen stools: 25,000 minimum. People slide on and off these constantly, so a tight weave matters as much as the number. See our dining chair fabrics.
  • Occasional chairs and bedheads: 15,000 is usually plenty, which opens up linens and decorative weaves.
  • Scatter cushions: rub count barely matters. Choose for look and feel.
  • Outdoor cushions: rub counts on outdoor fabrics are often modest, because fade and mould resistance matter more outside. Choose a solution-dyed fibre first.
  • Cafes, hotels and offices: 30,000 minimum, with 50,000 or more for high-traffic booth seating.

Using rub counts well

  1. Decide how hard the piece will work: decorative, occasional, everyday or commercial.
  2. Filter to fabrics in the matching wear band.
  3. Choose fibre and weave for your household, such as tight weaves for cats or bleach-cleanable fibres for kids.
  4. Choose colour and texture last, from the fabrics that passed the first three checks.

Our guide to choosing sofa fabric walks through these steps in full, and our common upholstery mistakes post covers what goes wrong when they are skipped.

Check before you buy

Every fabric page on our site lists its rub count, composition and care. If you would like a second opinion on a project, order samples from our fabric samples page and ask us.

Common questions about Martindale rubs

Is 50,000 Martindale good?

Yes. 50,000 rubs is well into commercial grade and more than enough for a family sofa.

What rub count do I need for dining chairs?

At least 25,000 for everyday family dining chairs, and 30,000 or more for commercial use.

Do curtains need a rub count?

No. Curtains are not sat on, so abrasion resistance matters very little. Light fastness and drape matter more.

Is Martindale the same as Wyzenbeek?

No. They are different tests with different methods, and the numbers cannot be converted reliably.

Back to blog