Outdoor chair with cushions beside a pool

Best Foam for Outdoor Cushions: Reticulated Foam and What to Avoid

Outdoor cushions fail for different reasons from indoor ones. Sun fades the covers. Rain gets in through seams and zips. Moisture stays trapped inside ordinary foam, which goes mouldy and smells. And thin foam on hard timber or aluminium furniture flattens fast. The best outdoor cushion works as a system, with the foam, fabric and construction all suited to how exposed the cushion really is. Getting the foam right is the part most people miss.

First, how exposed are your cushions?

  • Covered: under a solid roof or deep verandah, rarely wet.
  • Occasionally wet: exposed to wind-driven rain, splashes or damp furniture.
  • Fully exposed: left out in rain, around pools, at the beach or on boats.

A conventional upholstery foam can work under a solid roof if it stays dry. Anything that gets wet regularly needs foam designed to drain.

Reticulated foam: the best foam for outdoor cushions

Reticulated foam, often called quick-dry or dry-fast foam, has a fully open cell structure. Where ordinary foam has closed or partly closed cells that hold water like a sponge, reticulated foam lets water run straight through and air flow back in. A soaked cushion drains in minutes and dries in hours rather than days, which prevents mould, mildew and odour. It is the foam we recommend for any outdoor cushion that could get wet, and it is the only foam we use in our custom outdoor cushions. You can also order it cut to your size through our custom foam service.

Water-resistant fabric is not a waterproof cushion

This is the most common misunderstanding. Even when the face fabric repels water, the seams, zip, piping and stitching holes let moisture in. Once water reaches the foam, what matters is how quickly it can drain and dry. Wrapping ordinary foam in plastic to keep it dry tends to trap condensation and make things worse. Our article on whether outdoor fabric is waterproof explains why breathability matters.

How thick should outdoor seat cushions be?

Most outdoor lounge seat cushions are 75 to 100 mm thick, enough to cushion you from a hard frame. Dining chair pads are usually 25 to 50 mm. Thinner cushions need firmer support to stop them bottoming out. Before increasing thickness on replacement cushions, check the arm height and the seat height at the table, as cushions much thicker than the originals can make a setting feel out of proportion.

Be careful with wraps outdoors

A soft Dacron wrap makes indoor cushions look full, but any extra fibre layer changes how moisture behaves. On fully exposed cushions, keep wraps minimal or use an outdoor-rated wrap, so water is not held against the foam. Drainage and drying should come before a plump edge. For covered cushions, a wrap is fine.

Help water escape

A good outdoor cover should not behave like a sealed bag. A drainage mesh panel or a breathable underside lets water out of the bottom of the cushion. After heavy rain, stand cushions on their edge so both faces dry. Storing them in a ventilated deck box, rather than under a tarp, also extends their life.

Choose fabric and foam together

The cover needs to handle UV, rain and cleaning. Solution-dyed fabrics hold their colour far better than surface-dyed fabrics. Warwick Lomani is a solution-dyed olefin rated 150,000 rubs at $88 per metre, and Sunbrella Canvas is a solution-dyed acrylic at $92.40 per metre. Browse our outdoor fabrics and Sunbrella collections, and read our guide to the best outdoor fabric for Australian sun. Near pools and the coast, choose fabric that can be rinsed regularly to remove chlorine and salt.

Caring for outdoor cushions

  1. Brush off leaves, dirt and sand regularly, before they work into the weave and hold moisture.
  2. After rain, stand cushions on their edge to drain, then let them dry in the air.
  3. Rinse off salt and chlorine with fresh water after swims.
  4. For marks, use mild soap and water. Solution-dyed olefin and acrylic fabrics can usually be cleaned with diluted bleach for mildew; check the care label first.
  5. In long wet spells or over winter, store cushions somewhere dry and ventilated.

See our cleaning guide and our care labels explained page for more detail.

Outdoor scatter cushions

Scatter cushions outdoors need a different fill from indoor ones. Feather absorbs water and is slow to dry, so for outdoor scatters we use hollow polyester fibre in a weather-resistant, mould-resistant canvas casing, which lets water move through. Our cushion insert fill guide compares every fill we offer.

Measuring replacement outdoor cushions

Do not measure the old foam, which will have shrunk and compressed. Measure the furniture frame or the inside of the old cover, from seam to seam. Note the thickness, any rounded corners and any notches around posts, and whether the back cushion sits on top of the seat or behind it.

Common questions about outdoor cushion foam

Can outdoor cushions be left in the rain?

With reticulated foam and outdoor fabric, yes. They will get wet, but drain and dry quickly. Standing them on their edge helps.

What is the difference between reticulated foam and normal foam?

Reticulated foam has fully open cells, so water passes through instead of being absorbed.

Is reticulated foam comfortable?

Yes. It feels slightly springier and more open than indoor foam, and is comfortable for outdoor seating.

How long does outdoor foam last?

Quality reticulated foam typically lasts many seasons, much longer than ordinary foam used outdoors.

Back to blog