Poolside resort loungers upholstered in 3 Beaches Kindle Ivy outdoor fabric

Reversible Outdoor Fabric: Two Looks From One Design

Most people never turn a fabric over before they buy it. With a reversible outdoor fabric, the back is half the point. A reversible jacquard is woven so the design appears on both faces with the colours swapped: pale motifs on a dark ground on one side, dark motifs on a pale ground on the other. That gives you two coordinating fabrics for the price of one design, and it makes styling an outdoor setting much easier. This guide explains how reversible fabrics work, which 3 Beaches designs are reversible, and how to make the most of both sides.

How a reversible jacquard works

A jacquard pattern is woven into the cloth rather than printed on top. The loom lifts individual warp threads to place each colour exactly where the design needs it. In a two-colour jacquard, wherever one colour shows on the front, the other colour shows on the back. Turn the fabric over and you get the same design in reverse.

Because the pattern is part of the weave, it will not rub off or crack the way a print can. In a solution-dyed acrylic such as the Sunbrella-made 3 Beaches range, the colour also runs right through each yarn, so both faces hold their colour in full sun. If you are new to outdoor fibres, our guide to outdoor fabric types explains why acrylic lasts so well.

Which 3 Beaches designs are reversible?

Fourteen designs in the 3 Beaches range are reversible. Each colourway gives you a lighter and a darker face.

Sabi Sands

  • Agra: soft ikat-style spots, in seven colours from Barley to Indigo.
  • Kindle: soft-edged squares like a block print, in six colours including Ivy and Canyon Sunset.
  • Ink: a tiny lattice that reads as texture.
  • Capra: nested diamonds with a kilim look, in Indigo.
  • Reign: a cane trellis, in six colours.
  • Wave: fine white lines flowing down Indigo.

Auchenflower

  • Desert Eve: an ornate damask-style floral, rated to 85,000 double rubs.
  • Sunflower: stylised sunflower medallions in a trellis.

Jewel and Coast

You can browse every design in our 3 Beaches by Sunbrella collection.

Five ways to use both sides

1. Dark seats, light scatters

Upholster the seat and back cushions in the darker face, which hides marks better, then add scatter cushions in the lighter face. The set will always match because it is literally the same cloth.

2. One of each on a pair

On a pair of armchairs or sun loungers, use the dark side on one and the light side on the other. It looks considered without being too matchy.

3. Front and back

Make cushions with the light side on the front and the dark side on the back. Flip them for a different look, or turn them over when the sunny side has done its time.

4. Piping and borders

Use the opposite face for piping, a flange or a gusset band. It adds definition without introducing a new fabric.

5. Mix two colourways

Because the faces swap, the light side of Agra in Barley and the dark side of Agra in Cumin can share a setting while still reading as one family.

Ordering reversible cushions

Our made-to-order cushions in 3 Beaches fabric list reversible colours as "Dark Side" or "Light Side". That tells you which face we put on the front. A popular choice is to order the same colour in both, for example Kindle in Classic Dark Side and Classic Light Side, and alternate them along a lounge.

Every cushion comes in five sizes, from 35 x 55 cm lumbar to 60 x 60 cm square, as a cover only or with an outdoor or indoor insert. For larger made-to-measure pieces such as bench and lounge cushions, use our cushion builder.

Tips for upholsterers and DIY sewers

  • Mark the faces. Before cutting, chalk "L" and "D" on the back of each piece. It is surprisingly easy to mix them up halfway through a job.
  • Check the repeat. Desert Eve repeats every 71 cm across, Capra every 58 cm. Allow extra fabric to centre the design. Our guide to how much fabric you need shows how.
  • Check the rub count. Ratings range from 9,000 double rubs for Reign (decorative use only) to 85,000 for Desert Eve. Use the higher-rated designs for seating.
  • Order samples. A fabric sample shows you both faces in your own light before you commit.

Caring for reversible outdoor fabric

Care is the same as any Sunbrella-made fabric. Brush off dirt, blot spills, and clean with mild soap and lukewarm water, then rinse and air dry. Removable covers can be machine washed cold on a delicate cycle. For mould or stubborn marks, use a diluted bleach solution, rinse well and air dry. Sunbrella recommends avoiding hard-bristled brushes and abrasive cleaners, and never tumble drying.

Common questions about reversible fabric

Is one side the right side?

No. Both faces are finished and suitable for use, so choose whichever suits your scheme.

Do both sides wear the same?

Both faces are woven from the same solution-dyed yarns, so they resist fading equally. The abrasion rating applies to the fabric as a whole.

Is reversible fabric more expensive?

Not necessarily. Agra is $156 per metre and Kindle $151 per metre, in line with other patterned designs in the range.

Can I use reversible outdoor fabric indoors?

Yes. It cleans easily and holds its colour, which makes it a practical choice for family rooms and sunrooms. See our 3 Beaches fabric guide for more ideas.

Back to blog