Best Foam for a Campervan Mattress: Thickness, Support and Fit
Share
A campervan mattress is as much a space-planning problem as a comfort problem. You usually have less depth to work with than a household mattress, the bed may need cut-outs for wheel arches or curves for the walls, and the underside is exposed to condensation. The best results come from designing the mattress around your actual vehicle, rather than ordering a rectangle of soft foam and hoping it fits.
How thick should a campervan mattress be?
It depends on headroom, the foam you choose and whether the bed is permanent or made from seat cushions. More thickness gives the foam more room to compress before you feel the platform underneath.
- Around 50 mm: very compact. Needs firm, supportive foam, and suits occasional use or lighter sleepers.
- Around 75 mm: a practical compromise where headroom is limited.
- 100 mm and over: the most comfortable for regular sleeping where the layout allows.
Before deciding, lie on the bed platform and check you can sit up comfortably with the planned thickness added.
Support matters more than softness
A very soft foam can feel lovely when you press it with your hand, then bottom out under your hips and shoulders overnight. In a thin mattress, the supportive core matters most. If you like a softer sleeping surface, a supportive base foam with a comfort layer on top works far better than one thick piece of soft foam. We can add a memory foam comfort layer to custom mattresses; ask when you request a quote through our custom caravan and campervan mattresses service.
Firmness for different sleepers
How you sleep affects the right firmness. Side sleepers put most of their weight through the shoulder and hip, so they need a little more give on the surface to avoid pressure points, which is where a comfort layer helps most. Back and front sleepers usually prefer a firmer, flatter surface that keeps the spine aligned. Heavier sleepers need a firmer, denser core so the mattress does not bottom out on a thin platform. If two people with different preferences share the bed, a medium-firm core with a soft top layer is usually the best compromise. Temperature matters too: memory foam firms up on cold nights, so in a van used through winter, keep any memory foam as a thinner top layer.
Measure the finished bed platform
Vehicle walls taper, curve and change shape with height, so the floor dimensions often differ from those at mattress height. Measure where the mattress will actually sit. Check:
- the maximum length and width
- the width at several points along the van
- wheel arches, cabinetry and window frames
- door openings and access panels
- how the mattress will get in and out of the van
Use a template for curved walls
For anything more complex than a rectangle, a full-size template is far safer than a list of measurements. Cardboard, builder's paper or taped sheets of firm paper all work. Keep it flat, mark which edge faces the front of the vehicle, and note anything that needs a cut-out or bevel.
One piece or split?
A one-piece mattress feels best to sleep on, but can be hard to get through a narrow van door or lift to reach storage. A split mattress is easier to handle and to lift section by section. If you split it, put the joins where they will disturb sleep least, usually across the bed rather than along it, and make sure the pieces cannot drift apart. Fabric hinges or a fitted mattress topper both help.
Ventilation underneath is essential
Warm air from sleeping bodies meets the cold platform and condenses underneath the mattress. If that moisture is trapped night after night, foam and covers can develop odour and mildew. Leave space for air to move where you can, using slatted or drilled boards or a breathable anti-condensation mat. Lift the mattress regularly, especially after cold nights, and dry any moisture before packing the bed away.
Think about bedding
Highly shaped mattresses fit a van beautifully, but standard fitted sheets will not. If easy bedding matters, consider whether a simpler outline with small corner gaps is acceptable, or plan custom sheets at the same time. A removable zipped cover on the mattress itself is worth having either way, so it can be washed.
Choosing mattress cover fabric
Mattress covers should be comfortable against skin, breathable and easy to clean. A tightly woven polyester or poly-cotton is a good choice. Warwick Brooklyn is a hard-wearing plain at $44 per metre, and Warwick Keylargo is a washable linen-look at $55 per metre. Browse more in our campervan and caravan fabrics and linen and linen-look fabrics. Avoid vinyl for sleeping surfaces, as it does not breathe.
Beds made from seat cushions
Convertible dinette beds have different priorities, because each piece must also work as a seat during the day. Read our guide to campervan and caravan cushions, or see our campervan cushions service.
Common questions about campervan mattresses
What is the best thickness for a campervan mattress?
100 mm is the most comfortable for regular sleeping. Use 75 mm where headroom is tight.
Is memory foam good in a campervan?
As a top comfort layer over a supportive base, yes. Memory foam firms up in cold weather, so it suits a layer rather than the whole mattress.
How do I stop condensation under my van mattress?
Ventilate underneath with slats, holes or an anti-condensation mat, and lift the mattress to air it regularly.
Can you make a mattress to fit my van exactly?
Yes. Send a full-size template and we will cut the mattress to match.