Campervan and Caravan Cushions: Foam, Fabric and Measuring Guide
Share
Campervan and caravan cushions have a harder job than almost any cushion in a house. During the day they are dining seats and lounge cushions. At night the same pieces often become part of a bed. They get sat on in wet swimmers and sandy shorts, packed and unpacked, and they live in a space that heats up, cools down and collects condensation. Choosing the right foam and fabric, and planning the layout as a whole, makes the difference between a van that is comfortable for years and one that needs redoing after a season.
Start with what each cushion does
Before choosing foam, draw a simple plan of the van and label every cushion with its job: seat base, backrest, bed infill, or a combination. A dinette seat that becomes part of the bed needs a different balance of support and comfort from a backrest that is never slept on. For convertible layouts, think about the whole bed surface rather than each cushion on its own. When the pieces are rearranged at night, cushions with different thicknesses or firmness create ridges and dips you will feel at 2am.
What thickness works best?
Space is always limited, so thickness is usually set by cabinetry, table height and how the bed converts.
- 50 mm: works where space is tight, but needs firm, supportive foam so you do not feel the board underneath.
- 75 mm: a common compromise between seating height and sleeping comfort.
- 100 mm: gives the most comfort for sitting and sleeping where the layout allows.
Check the finished sitting height against the table, and the finished bed height against headroom, before increasing thickness.
Seats, backs and beds need different foam
Seat bases carry concentrated weight and need firm, durable foam. Backrests can often be softer. If the backrests also form part of the bed, choose foam that still works when laid flat. For a dedicated bed, see our separate guide to the best foam for a campervan mattress, which covers comfort layers and ventilation in more detail.
Measure the finished van, not the plans
Van interiors are rarely square. Cabinet edges, wheel arches, curved walls and door openings all change the shape. Measure the finished space after the cabinetry is installed, taking measurements at several points along each long edge. Where the shape changes, or the wall curves, make a full-size template from cardboard or builder's paper. Mark the top, the front and the orientation clearly, and number each template so similar pieces cannot be mixed up.
Plan the gaps between bed cushions
A dinette bed often uses four or more cushions side by side. If every cushion is cut to the exact opening without allowing for the covers and piping, the set can become too tight to lie flat. Leave too much and you get gaps that are uncomfortable to sleep across. Plan the whole finished upholstered layout together, including the thickness of the cover fabric and any piping. Our campervan and caravan cushions service makes the complete set to your templates.
Condensation and ventilation
Vans get condensation even when cushions never see rain. Warm, moist air from cooking and breathing meets cold walls and floors, and moisture collects under cushions that sit on solid boards. Lift cushions regularly to air them, avoid packing them away damp, and consider a breathable mesh underlay or ventilated boards under permanent beds. For cushions near the door or an outdoor kitchen that may get properly wet, an outdoor reticulated foam is a better choice, as it drains and dries quickly. See our guide to the best foam for outdoor cushions.
Choosing caravan upholstery fabric
Van fabric takes heavy friction, sun through windows, food, pets and constant handling. Look for:
- High rub counts. At least 50,000 Martindale rubs, and ideally 100,000 or more for seats.
- Easy cleaning. Washable, stain-resistant or wipe-clean fabrics save a lot of trouble on the road.
- Fade resistance. Van windows let in a lot of sun, so lighter or solution-dyed fabrics age better.
Our campervan and caravan fabrics collection only includes fabrics suited to this use. Good examples are Warwick Bedford, a small check rated 147,500 rubs at $44 per metre, and Warwick Keylargo, a washable linen-look rated 160,000 rubs at $55 per metre. For wipe-clean surfaces, see our faux leather and vinyl collection and our vinyl guide.
Updating an older caravan interior
Recovering the cushions is one of the quickest ways to modernise an older caravan. Many original interiors use busy patterns and warm browns that date a van instantly. A plain or subtly textured fabric in a mid-tone neutral, such as stone, oatmeal or soft grey, makes the space feel larger and lighter, and hides everyday dirt better than white or cream. Add colour with scatter cushions, which are easy to change. If the original foam is more than about ten years old, replace it at the same time, as new covers over tired foam never sit properly.
Removable covers are worth it
Zipped, removable covers let you wash them, reach the foam, and replace one or the other later without starting from scratch. Put zips on the back or underside of each cushion, where they are hidden but easy to reach.
Common questions about campervan and caravan cushions
What foam is best for caravan seats?
A firm, durable upholstery seating foam for seat bases, with softer foam for backrests. Use outdoor reticulated foam where cushions may get wet.
How thick should campervan seat cushions be?
Usually 75 to 100 mm, or 50 mm in tight layouts with firmer foam.
How do I stop mould under caravan cushions?
Air cushions regularly, never store them damp, and add ventilation under permanent beds.
Can you make cushions from a template?
Yes. Full-size templates are the most accurate way to order van cushions with curved or angled edges.