Custom Outdoor Cushions: How to Plan, Measure and Order
Share
Off-the-shelf outdoor cushions rarely fit built-in seating, older settings or a daybed with unusual proportions. They are often made with indoor-style foam that holds water and fabric that fades in a summer. Custom outdoor cushions solve both problems: they are made to the exact size of your furniture, with foam and fabric chosen for how exposed the setting is. This guide covers what to decide before ordering, so the finished cushions fit well and last.
Step 1: work out how exposed the setting is
Everything follows from this. Cushions under a solid roof live a very different life from cushions around an uncovered pool or on a boat. Note whether the setting gets direct afternoon sun, whether rain reaches it, and whether cushions will be left out or packed away. For anything that can get wet, we use reticulated quick-dry foam, which drains and dries quickly. Our guide to the best foam for outdoor cushions explains why.
Step 2: measure the furniture
Measure the frame where the cushion sits, not the old cushion, which will have shrunk and rounded off. For each cushion, record:
- width and depth of the seat, at front and back
- the thickness you want
- any rounded or angled corners
- notches around posts or arms, with their position and size
- for back cushions, the height and whether they sit on the seat or behind it
For curved daybeds, built-in benches and anything irregular, make a full-size cardboard template and mark the front edge.
Step 3: choose the cushion style
- Boxed: a separate side panel gives crisp vertical sides. The classic look for lounges, benches and daybeds.
- Piped: piping along the seams sharpens the edges and adds definition. A contrast piping can pick up a colour from your garden or house.
- Knife-edge: a softer, thinner style suited to chair pads and back cushions.
- Bullnose: the fabric wraps over the front edge with no front seam, for a softer, more contemporary profile.
Step 4: choose the fabric
Outdoor fabric needs to resist fading, mildew and water, and be easy to clean. Solution-dyed fabrics, where colour runs through the fibre, are the standard. The main choices are solution-dyed acrylic, such as Sunbrella Canvas at $92.40 per metre in 35 colours, and solution-dyed olefin, such as Warwick Lomani at $88 per metre. Browse our outdoor fabrics, striped outdoor fabrics and Sunbrella collections, and compare fibres in our outdoor fabric types guide.
In full sun, mid-tone neutrals and stripes look good for longest. Save strong colours for scatter cushions, which are cheaper to replace. Our guide to the best outdoor fabric for Australian sun goes into detail.
Step 5: add the practical details
- Zips: removable covers can be washed and the foam replaced later. Put zips on the back edge.
- Ties or tabs: stop cushions blowing off in wind and keep them square on the frame.
- Drainage: a breathable mesh base helps water escape on fully exposed cushions.
- Thread: outdoor cushions need UV-resistant thread, as ordinary thread rots in the sun long before the fabric fails.
Step 6: add scatter cushions
Scatter cushions make an outdoor setting feel inviting, and they are where you can use bolder colour and pattern. For outdoors, use polyester inserts in a weather-resistant casing rather than feather, which holds water. See our cushion insert fill guide and our custom scatter cushions service.
Common outdoor cushion mistakes
- Measuring the old cushion. Old foam shrinks and rounds off, so new cushions end up too small. Measure the frame.
- Using indoor foam outside. It soaks up water like a sponge and develops mould. Use reticulated foam anywhere rain can reach.
- Choosing very dark colours for full sun. Even solution-dyed fabrics look best for longest in mid tones. Dark cushions also get hot to sit on.
- Forgetting the back cushions. Deep lounges and daybeds need back support to be comfortable. Plan seat and back cushions together so their thicknesses work.
- Going too thick on dining chairs. A thick pad lifts you too high for the table. Keep dining chair pads to 25 to 50 mm.
What affects the price
The cost of custom outdoor cushions depends mostly on size, thickness, style and fabric. Boxed and piped cushions take more fabric and sewing than knife-edge pads, and large daybed cushions use a lot of foam. In our range, outdoor fabrics start at $88 per metre, with most between about $90 and $155. A typical outdoor lounge seat cushion uses roughly one to one and a half metres of fabric. Send us your measurements and fabric choice, and we will confirm the price before anything is made.
Looking after them
Brush off leaves and dirt, stand cushions on their edge after rain, rinse off salt and chlorine, and store them somewhere dry and ventilated over long wet spells. Most solution-dyed outdoor fabrics can be cleaned with diluted bleach for mildew; check the care label. Our is outdoor fabric waterproof article explains why cushions still get wet inside, and why that is fine with the right foam.
Ordering
Our custom outdoor cushions service makes cushions to your measurements or template, in any outdoor fabric we sell, with reticulated foam. Not sure on colour? Order up to six samples from our fabric samples page and look at them outside, in your own light, before deciding.
Common questions about custom outdoor cushions
How long do custom outdoor cushions last?
With solution-dyed fabric, reticulated foam and UV-resistant thread, many seasons. Regular cleaning and good drainage extend their life further.
Can outdoor cushions stay outside all year?
Properly made ones can, though storing them during long wet spells helps them last longer.
What thickness should outdoor seat cushions be?
Usually 75 to 100 mm for lounges and daybeds, and 25 to 50 mm for dining chair pads.
Can you make cushions for a curved daybed?
Yes. Send a full-size template and we will make cushions to match.